Make Believe: Smoke & Mirrors, Part 1 -- Apollo Moon Hoax Proof - VFX Analysis
- Vedic Science
- A very intricate scientific analysis of NASA's own film and video footage from the Apolo Moon Landing Missions. This is a very scientific and detailed 2.5 hour presentation. Very well produced but unfortunately the producer has used some voice masking system that makes the audio very difficult to understand. However this video provides the most in-depth scientific study I have seen of NASA's own Apolo Moon Mission film and video footage.
From the producer:
I measured the speed of falling objects and of falling sand in the Apollo television footage, referencing the number of footage frames they traveled to/from their apex, and referencing the astronauts for height measurement. There are dozens of instances where the measurements are significantly inconsistent with lunar gravity. This is not possible were they really on the moon.
And, based on my evaluation for how the footage was captured and altered into slow-motion, the measurements are precisely consistent with Earth gravity.
My measurements are reproduce-able by independent scientists, and I give clear reference to the source footage so that this can be done with the least amount of effort.
I would be incredible pleased if a high school student or a team of high school students – or younger – took the effort to do this. That is how accessible and of basic science this analysis is.
That is about 5% of the video presentation. There are quite a few cool things to learn in it.
The full presentation I expect will make absolutely clear to any reasonable person that the moon walks were staged.analysis, the footage supposedly captured by the Apollo program, our cultural community, it was captured on Earth. I'm sorry my voice sounds like this. I don't want you to go away. There were six missions that landed on the moon, as explained by NASA.
Apollo 11, 12, 14, 15, and 16, and 17. Little Apollo, using the shorthand, the past uses A11, A12, and so on. The first three missions, A11-214, had television cameras set up on tri-quads on the surface of the moon by the astronauts. The second three, A15, A16, and A17, had television cameras for rolling control by machine control on Earth, set up on moon plates.
The EPA solicited at the time, our extra behavioral activities in which the astronauts left the planet and went out on the surface of the moon. In the last three issues, they were all in service on the 23rd day of the Here is the setup that was on the front of the blue buggy, the camera on the left, and the receiver and transmitter went at you. Here is the blue buggy camera in the front, and that camera in the middle, which we will talk about later. All the footage of this analysis was acquired from NASA, their website, UR Billings.
Click on Mission, you'll see the movie clips, the segments, they were all broken up into tiny clips, and you can grab each clip and put it together, and you can see this is list of eclipses, put them together, and made a giant edit, which I analyzed. Here's a sample, beginning, you can see the running time frame at the top, you can see the name of eclip at the bottom, and the segmented part of the mission that is listed on the site. So easy reference, before you go back and you have to analyze yourself, which I encourage you to do. There was some re-timing of eclipses, for proper analysis, to find out why, It's obvious, this is the motion and it's fed up.
You can see the timing of the change, it's the timer at the bottom, how much the length of the clip was modified. Here's another sample, you can see the timer at the top, and the new frame, right at the bottom, you see the running based on the time for change, that number was changed to the one at the bottom. It's not quite straightforward, it's quite a few different time changes that you use. But noticing that you're getting a very good clip, you can see here on the list, how it corresponds to the clip list found at NASA's site.
Easy for you to reference what I'm showing you, go to the site, click on the clip yourself, do your own analysis, which again, I encourage you to do. Now briefly summarizing the clips you categorized by mission. We used to offer, except for page 12, almost as soon as they turned it on. This is slow motion, hopping and jogging.
It's quite extensive. You're going to have to speed it up. You will see more in the appendix if you'd like to see that. The color changes in the footage that we're playing later is very revealing, and it's how most people get it green.
It looks quite normal, somewhere right here on the surface. Seems reasonable. Well, that was sped up. This is the actual footage they presented to us, and very obviously, it's in slow motion.
Balance and, you know, slow motion. Again, you will see much more white in the view, being the red factor change. A small portion would have been even more terrible. When the altitude falls, you can see the estuarine jumping, but the sand falls faster.
Only a few examples were the same, responding to the same shot we had so far. So, I mentioned speed change quite a bit through speed change events. Which means, multiple speed changes in one clip. We already saw that start running away, and we did not notice that there had to be several speed changes.
Here is the actual footage. It looks reasonable, even looking fast, but watch. It will suddenly go with slow motion. That was presented by NASA.
One factor changing was ridiculous here, and it's utilized in different aspects of the entire hoax. I believe the TV footage was actually captured on 16mm, and then recaptured by a television camera. Hoax in different aspects, but an example of how a camera is pointed at a projector, the projector is projecting footage, and the camera recaptures it, and it was in 144 frames, slow motion. And then you can extract different frames and different patterns to create different frames per second pieces of film.
These are all the factors that capture the footage. The background is very large. Students introduce themselves into the extensive program directed by Apollo to capture high-detail imagery of the landing sites. The intelligence service PGA has been to go.
Here we are in POV on the set model. Necessary dependence per second. It was captured by the rovers, photographs as well as a camera, data acquisition camera. Here we see it stabilized and sped up.
It looks normal. It's on the right set. It's fast on the set. It's also quite possible.
This was modeled on the analysis we missed, which they had some fancy setups. The simulator was on the set. Here you can barely see the equipment. Well, from the same set bottle that is in the middle, they had a flight simulator set up, complex modeling on the side, matching the generated footage, all footage from a clandestine mastermind.
But look at this incredible footage that looks real to me. Computer-controlled camera, a tiny, tiny model. I believe they used larger models. The simulation, the photos, tiny models show extraordinary results.
They had made a camera, right over a model, And they actually use the same technology to train the astronauts for the Apollo missions. That's a moon model with a flight simulator. Live, real-time flight simulator camera. This is actually a lunar rover simulator.
Same build. The camera, here it is, right? A model of the moon's surface, which they would actually accurately model the surface they would be driving on. They have two cameras, two views with one camera. up and down, as if the car is reacting to the surface.
The complex set up giant, accurate, moon models, more detailed, for closer landing. This is all set up for simulating landing, and giant simulators that utilize real-time cameras run over those models, operating behind me. You can see how large and small compared to the model. In the simulator, these are just photographs from the simulator.
But quite extraordinary. You will reference footage later to see how easily that was visualized. Being responsible for the visual effects by Les Koppel, who briefly showed us history, there's plenty of information about him, which is supposed to go to introduce him. With lighting footage, this is kind of square up a bit, you can see there's a difference in lighting and in craters, because before the dust it's a model, and after the dust it's the set that It was a hoax on me.
The astronauts were only allowed to talk to astronauts on them. They were in on it, as well as the camera operator, because obviously the camera was recording, not live operating. And as well as agents, maybe a few agents in Michigan. The analysis is obviously the most important part, but I think some orientation is necessary so you understand what you're looking at.
A good place to begin is to put the surface to your water. TV cameras are used. A rover is a rotating disc that can print green and blue capturing actually intensity and give you more motion on your skin. In video, you can audit skin lines and even skin lines.
And as the object moves, you see the combing. This is an exaggerated version. Sometimes there's a little blurriness and glow and it's a beautiful image. It's a simulated shot of the moon.
So the whole purpose is to use progressive, very big colors, and you can see a lot of gray. So it's very, very slow. It's sort of a short frame rate. We'll be analyzing objects.
Why you're seeing what you're seeing per second was the actual footage. Again, I did not see the importance. Then there are the cameras that we utilize. Lenses, there's distortion as a result.
You can see people with modern cameras that we have. So you can see the glass inside. Lenses are curved. They're curved more extremely, less extremely.
There's the ray of lenses. So the light moving through the perimeter here is dualizing it up with the opposite of a pinch. Light per second is filmed through the projector. I'm grabbing the film, moving it.
There's a spinning disc going right through. It reels the film. I quickly put the film through the projector. It was captured using the camera on the left.
It's a 1-meter camera. The projector went right. The projector is captured by the camera. You can put it in motion.
You can capture it with a projector. One second of action capture projected is 144 frames captured and projected at times as long as 1.2 frames per second. Accomplished by the optical printer I mentioned. Summary of a camera pointing at a projector, projecting one frame at a time, and the camera clicks.
And you can skip three frames and capture another frame. So here we have 100 frames with different frames on the 144 frame strip using our optical printer. And you can see the pattern I used, the frames I used. That's different frames per second.
We can recreate frames per second depending on the pattern we choose. Very significant frames per second extracted from frames and then we set up all those frames per second. You take 59 frames per second how it was captured, the speeds it was captured were generated, how it was played, and how it was sloshed. These are the factors of frame length utilized and idealized to reverse their slosh.
Those frames per second modified by the packer's mission. There is no other difference between an action, almost identical at the end of my 44 frames per second. Top is also different. We have 8 frames, so you can jump into the first 3, and I could bias.
It's a bias simulation, as long as you can clearly guess where it is, here, and also the index where it starts building up. This is on these graphic, raw, non-zero, and I think it was on my frame. I have occasionally worked tricks with the second drop case. Stabilize the footage fires.
Straighter footage to see how footage here. 31 modified is correct. See the difference. Should be 31 at that height.
I modified the footage more closely. It's more perceptive to you. As I said already, sizing. I didn't say scale 15.
We had that stabilization. See less social figure. Obviously What's happening here is it's wrong in my footage, but I had this promotion and this speech change right there. You can see the extreme, popping, multi-meta of the footage.
This is a classic event. My analysis of the footage, it's a profound sandfalling. Parted, separated as a clip, so you're seeing every time I fell, sandfalling. The analysis you see, I limited to the ones that I thought I could analyze.
I'm going to give you an image of what the sand separates as you get a clear indication of when it starts and stops going up or going down. You can't believe it. You don't even know where it starts. You see enough frames that you can say, I've seen it.
And again, as we get to produce a case of it has more storage when it starts, it's raw, more in frames. If it's off by a frame, that's minor compared to the differences we're seeing here. That's where I start before hitting the ground. I can really clearly hit the ground. as an endpoint to follow your lens and stop here where it is the same.
Please notice the clip is referencing the bottom. It goes to the NASA site reference earlier in the presentation. And it's yourself interested to prove so. We're at the top of what the instrument was.
And to help aid myself in the analysis, I use one of my gravity balls. It starts to stop. Our objects, their speech nature factor changed. It's very interesting to clearly see.
You see that same tree behind Sam gets and he hits the ground and you draw on the same line and line at the same time because there's no line to slow down. But his feet, the jumps were obvious ones to me. Sam is up there with his feet. And he's up there with his feet and as his earth gravity, he's falling slower because he's afraid for a second on their end.
But change in history. As much as the camera over to action, which is why they make the decisions they make with the camera. but keep running would change. So I watched that, I could read the set was started on and here you can see it's very, very same speed and watch it move, move, move. The camera had to see if it's close.
They found moments where it is fully hidden, so usually you could have the camera here, shift to the, you can see the road, but look at that, almost. It was motion blur, and the motion blur smoothed out the actual rate of speed. It was quite noticeable. I don't think that has ever been in any legitimate footage.
We're going to hear you as fast. I'm sure you're missing exactly what the changes are. There's a standard .615 robo-activity that changes the way you run. That's a factor.
Now, you know, first of all, it was proper at 6.615 earlier, and it wasn't proper. I had to find the time to change as they became standard practice. When I knew the robo, I would find the vector that works, I just look for the opportunities to change, so I probably, most likely, do not nail it precisely every time. But no one wants to look at this.
When we go to sleep, there's some emotion. If you ever wash yourself, there's some emotion all the time. It's absurd. The way I've shown this to you is my determined way that it was effective and it needs to be utilized.
There is a speed change. And then I show you the best of footage. Then I show you the constant change. And then I show you the best of footage.
And then I show you the constant change. And then I show you the constant change. And then I show you the constant change. And then I show you the constant change.
There is a speed change, and then I show you the desert footage, and then I show you the constant vector that I first created, which was revealed that it was a problem. I did a bunch of things I had to do of this process and see what's going on. Here's the constant vector. Now here's the speed change between 0.57 and 0.54, not dramatic.
It's a great example of how the astronauts in full motion, he hits the ground and starts You know, stride, or some kind of change that allows some time. The summary kind of regains balance. And I actually find walking, these are all short clips. If you were viewing, you'd see all the clips, and you'd almost be walking, but...
I was jumping, and I was looking at the suit, which you can see below in the suit section. One of the explanations was going on there. And I said, you know, it's supposed to be constantly moving, very slow, and it's still moving. and all kinds of things going on to keep you busy and keep you from figuring out what's going on. Keep you in those slow moments of catching his balance, just in his step.
Catching your balance and technically we're all jerks in slow motion. Testing. Quick set. Well, I won't look at all of them, but we will look at a lot.
Some of the actions might not be as small as a pod, just because you accept the action as what it really is. This could have been acceptable as anything else, but it's not really reasonable. Slow motion, and I turned pages. The brick slowed me.
Here it's a little slower. It was different, but not really as much, so... It still looks slow there, but it doesn't look nearly as real as it was when he was shuffling King's ass, if that was funny. I put it in there.
Slowly, they actually did that damage, but for whatever reason, I was there. Actually, this was just a smaller brick, actually. We can actually use a set, multiple sets, probably a set for every location they went to. The sets for every location.
I'll get rid of it. So how is it just this small now? And we're somewhere in that range. The model was boundaries.
It was made together, just like the panoramic images, which were raised here. The bottom is very similar to some of the technology from the 60s. But it was troubled. You can barely see the boundaries in the sky.
You can't see them at all, you can only see them because you know they're there. There's a little more attention, you can improve them. At the bottom you can't see them here, at the top you can. You can see the size of this audience.
For the set up, there's three projectors. This is similar, but not necessarily how it was copied. The moon set had a camera model turning around, taking pictures. The location, the projection on the optical thing, as you can see, these are moving.
They were projected and used that to calibrate the placement of the images on the screen. In fact, this is an example of a moon model, and you can see the lighting. You have multiple lights, not one light like the sun, and there is a boundary, but it's barely noticeable. Let's try some of this on the thing.
It's wire, so it's not going to flip over. I just doubt this thing would actually work. It's a set of details that was thrown in. It looks like a model, but it's a set of absolutes.
It's an example of a large set with crater spills. It came from satellite imagery, highly aligned with meters, kind of striping this for the satellite masses, multiple masses, and you're probably not seeing the focus about the scale of the center. I'm saying, by the way, as you can see, congratulations, eh? Here's an extraordinary reproduction.
Their ability to computer model location, this is a part of a re-bottom, let's just mock up again, here we are at a landing location, set reproduction, so to speak, from sand and backdrop, the loom surface, looms, distance, perception, and so forth, so we got away with a lot of that. far away and no one was looking at me so none of the footage was used for any discrepancy and so off as what the camera was. The model is used between the background and the set. Seeing the set match up perfectly but it's close enough certainly for this. Photographically they almost definitely modified the photographs they took to match with the set and or modify the set to match with the foreground so that the edge can be color-wise the lights, there's no setting in, so if they were on set, in the location of the camera, it just changed the model.
With your model, it changed from 8 to 1. You can switch your set of imagery. Now we can choose to create a dancer from the Astrocast, what I call the Parabrava dance, where they dance in a circle. Here it's multiple ones from subsets and single ones from undersets.
So this is another tool for surprising young people to fully create the sets that we use. I'm separating them here at the top ones. I won't be looking at them. I will be looking at them.
How do you support the locations actually being sets? And it's limitation of photography, distance differentiation, distance limitation. Basically just modification of knowing that on the set there's nothing about these that say they did not. There's nothing about them that says they definitely were on the set. and that's the advantage of implementations.
This is a great, simple set, which means the structure of the target these are simple things to do, it's not a big deal. And these are enclosed sets, they have to be enclosed to form the environments that we're going to discuss. The same thing about the S&P Accrual, which is so far out there, a simple set, but this is the one where we're actually behind the signs and they did most of the action on the dark side, the shadow side, they were really willing to dip, and that's an easy thing to mention in the set here. The main part of the set that I'm going to do a little later is that it's a bit of a sand assortment since that they had some kind of spray or a drop-spring.
Colored sand. Patterns based on, uh, they said they had to be recreated into the same thing. Mott sand. So the sand layers.
Darker sand on the beach if you needed. Lighter sand on the top. Do the trouble of forgetting the layers. Rocks.
The rocks is the nature of the background. It looks like you look at a huge landscape, but you're looking in a circle. If you wrap one end over to the other, the cylinder is more accurate than what you're looking at, which is why I did the cropped version of the panning. Panning, per se, we were reproducing with the astronaut.
It's very cool looking at a highly detailed imagery that would be a smart thing, but the limitations, that was all made up. Stereo photography, there are three ways of doing stereo. It shows them there's a red-green, right, combining the decoercions, where, you know, I didn't model it, but they technically built it so that it's good enough that you can see just a fireball, and the decoercions mean more stereo, because that changes because your brain's seeing indicators of dimensional balance and very little stereo, but it should be. He kind of extracts some stereo, and it looks like it's dimensional in the background, and that shows, oh, there's two different angles on the background, and that's quite possible, that was done by changing the image that was projected on the background.
Shot from a model, the model is three-dimensional. And the image is based on where the astronauts are on the set. And you get an accurate data. So the astronauts are hanging from a wall.
We'll discuss that here. It's going on with them. This is the extraordinary light you have to go to so you can see how he's strapped in. The effect of it is, here we are in the pressure-wise suit.
And we follow the cloud flow. You can see the legs are practically subsiding. He tests all of the cables that are on them. And I think sometimes this is produced to show all of the headaches that you have.
Hearts, skies, like gravity, weightless, gravity. He takes a baseline amount of progress to test the helmet. The movement, because of the restrictions of the spacesuit, was basically like being in slow motion. Like I said, it was tough for me.
Even now, I'm interested. at any frame rate you choose frame per second at zero percent that means uh you can fill in a better range of the proposed frame per second and you will have a real win the master rate 44 frames per second is 0.6 percent tires hot behavior and some movement gives me very good flow i see a lot of spinning there's the hardest thing that we can the legs are not floating here you can see the backpack then swaying there's a spin they only want to realize this this is an interesting same rig at the top metal rigging as the one here obviously so this is you can see the dust they said the dust was sticky dirt and sand was sticky because it was jagged and it says smooth like dirt sand which is absurd to me sand jagged right now it's like a stick to a suit and the reason it is sticky is because they had a miscule amount of oil next to it doesn't take much of it in my test. I think a tiny bit would be great, so I'll buy a bag of sand, take a little bit of cooking oil, just mix in a few drops.
A handful, or even a bowlful, and you'll see that it starts to become malleable almost like clay, and you can find the proper mixture so that it doesn't dust, meaning you don't see particles fly out into the air when you kick it. But it looks like we used a lot here, because you can see it's sticking to the machinery as well. So the dust was so sticky it started to come out sand. It doesn't make any sense.
They thought it's only dust, it's only sand. And these are some of the clear examples, probably because they overgrown our suits. Dust is not good, the sand is not reflecting the dark sand. But they said they had problems with dust, sticky dust.
And you see some Some of the other examples are way long, and they show a slightly set stuff, and you'll see how the same behaves. And what you see here is a piece of the same set of visual effects that has been modeled in technology, making virtual reality, simulators, and so forth. And I think that has visual effects on great things that were accomplished, and great data that were created elsewhere. So the Lumen Broker moved quite a distance across the circumference of the clock.
There were several 27th of August that we utilized. There's a great flaker that showed you more. And the simulator technology that we utilized has been around for ages here. Very simplistic versions.
Some of the moves that we brought were very native. There was a fancy version of a jet simulator. And here's a mock-up I did of how to do the Lumen Broker simulator. I was a student of Douglas Brown, and in the summer of this, I find this extraordinary every time I see it.
I find it extraordinary how real it was and how tiny a model was used to generate it. It's an aluminum, quite a tiny, tiny, big road. It created something incredibly beautiful. It was the slowest machine ever made.
It fell into motion control. It's used extensively in visual effects today. I mean, it's an extraordinary setup, and the time and effort for building these models and the team, it's just really extraordinary. The naked footage in the background, it was significantly, maybe three times as big as that.
There's a light simulator camera on the side where you can only have a fake lens get in there. There's a loomed and wheeled eye based on the pilot's action, actually used it for Apollo training. This is the loom surface, Apollo loom surface, a camera that moves along and it's not supposed to sit with the astronauts. It's just like a flight simulator instead of a rover.
There it is. I believe the camera's upside down, so I don't know if it's going to come here. Depending on what they thought worked best. We have a couple of astronauts coming in to enjoy their simulation ride.
I have the self-simulation, I'm sure, of them flying the ride and getting used to it. But if you look at the footage, it's pretty amazing what's going on. and how characters are reacting in various ways to the service. The other thing to keep in mind is that all of this is recording footage, channeling cameras, that's what motion control is. You create a channel where you record it on a computer which will reproduce it again and again and again and again.
And so you turn the camera to the left, you turn the camera to the right, you turn it behind you, and you do the same task. And you can do it frame by frame, you can do it on the frame by frame, you can do it second by frame, you can do it before second by second, it's kind of a little bit, it works best if you get the general idea. You can kind of move forward, and then you can actually move forward, and then you can actually use it a little bit. This is how we set it up.
This is pretty slow. You'll see I speed it up at first speed, and then I speed it up so it's all asleep. I'll speed it up. You'll find when you look at the landing footage later, it's pretty similar to this.
This is a summary of some tracks, it's not all computer controls, it starts with a model. The calipers, they take the picture calipers on the same day. They're having, they're making sure that they, because the astronauts are relying on them, they need to be completely oriented for their landing. And this is a simple mock-up of some of the class material.
That was kind of funny. Here's where I wanted to live in. We did a bunch more sophisticated for the host. This is a huge, as the name explains, it's a huge piece of I guess, I'm not sure what it's generally made of, so it looks like a highly-accurate model.
Get closer to your media, that doesn't it's not even, you've got to see more and more braids, look at all the sub-braids, and then this is all accurate like we're showing how accurate it is seen, but we're impressed. The area that this is being used for is a little simulator and after you buy it, you can have some media, which are all landing I'm going to go look at this little detail. And then close here, this is that model. I'm zooming close.
It's a little bit different. I'm going to move on. So there's a subtle detail happening in this. And if you made this model four times bigger, it has more detail.
And if I take it from the surface, I'm going to put it in the same, it's going to stay in the same zone. I'm going to figure out how I'm going to do this. The two guys at the bottom are standing next to it, and I don't know what this is using, but we're looking at this example, updated model. And the computer went out, and I used the set, It's basically the same thing that happens whenever it works.
Sometimes I think they animated it by generating shadows. Sometimes it was because the shadows were placed on the set, but I had a way to generate shadows so that they would be on the screen for the filmmaker and show them. Maybe it's not an example you can see, but it's rare, right? All those images are like a shadow in the future.
So it's quite possible that taking one frame at a time camera, and it's possible that he had discovered a kind of setup of the camera, and these guys came in and had me tie myself a camera, and I kind of figured the fact that we'd be able to double struggle with a bit, describe what we did in the future, because I had no idea that we could do that, and no doubt, if it was something like that, it would be a problem So instead of diving into this type of cameras, maybe they had something in there that could move the antenna so that it was protected from the camera. Here I'm showing an example. This is footage generated by filming a model. This would be a cute model, but it's an example of a simulated eye in front of the footage with no blueprint.
And now we're going to use the same footage and we're going to have a very simple blueprint A simple movement is kind of like what we saw on the rover simulator. Each other, one way or the other. Here you can see that an extra room has not had it, but it's set up for some of the enemies. You can see it if it's set up in the air.
We have the loose cameras. If it's on a stand, it's reacting to the movement of the rover. And now it's like a plane, and you can see how it comes together. It's called the Roswell Movement.
Smaller movement, on a stand, it's reacting to the rig. And then we're going to explore how simple it is for me and how I think it's easier for me to sit in the, I believe the government has already set it up, we've got reflections, and we see more in the appendix, which is quite extensive, I think it's interesting. I would like someone to come to me and really hand down what is what, but it's a second year, and there's sometimes a lot of things that happen on the road. A lot of things happen, and they travel.
Some of you travel far within a minute in the road. The road is not where you thought it was. There's a lot of opportunities to do the unmanaged to get everything done. What we do every week, we're going to bring our dad over.
I don't know what it is, but it's just incredibly insane. it's shaking so much. I minimized shaking a lot here. It would probably have done better if it had been done by hand because the tracker isn't quite tracking this graph. But, as you can see, it looks pretty similar to what I just showed you when it goes to the virtual setup of the simulator wire.
The V7, I believe this is the V7 and the previous video's clip was a couple of weeks, sometimes the next time I did it, sometimes I didn't film it with the model, sometimes I filmed it on the set I think it's quite possible this is vector footage in 7 and this is all reactive to nothing about this place. It explains, it says, you know, the landscape, so it's actually separate. So the detail, you can see the detail is all limited. The other thing about this release is that it's transferred to HP for us to keep it in the registry.
It should have been transferred in a digital form that we could grab and analyze ourselves. Perhaps someone can get that data. And there's a shadow on the ground instead of the computer that was on the set. It's quite possible that they're coming from the circles there, or it was all extensively done.
The story behind this is 2001, which was 500 years ago, and I've experienced similarly looming space stuff. His first job was with graphic films, working for Apollo, generating PR stuff for Apollo. To a million beyond, something he generated was sent around, which was used as the background, technology used as the background. Here's some of the information about 2.11 and its large field of formats.
It's really large field of formats. And the extraordinary update that came out in 2001. And there's evidence in supporting finance that it was a kind of R.D. to figure out all the technology that he used for the Apollo host. And it's always in his interest.
You can see it already following him already before he did 2001. It's never been documented, it's never been codified in the industry, and nobody really knows how to do it except me. So if you want to simulate a ride, give me a call. But the IMAX cameras weighed 150 pounds and they were huge, and we couldn't put them inside of a miniature, so we actually had to build miniature IMAX cameras for this show.
This was a 40-millimeter Zeiss Distigon lens. We built this tiny little camera with a little 50-foot load of film, because all the shots were very short, with motion control like you've seen before. But this whole camera is only about a foot square, and it could fit inside the miniatures. And then we had to build a theater at my studio, which had a dome screen, one of the DeLorean cars, and this whole sound mixing and motion recording operation.
And we set up the motion base with the hydraulic pumps and a half a DeLorean car with the seats so we could figure this whole thing out because we were working in this 180 degree field of view film process that was completely immersive. And I thought this was just the most fun I'd ever had of dealing with a motion picture project to where you're actually in the movie rather than looking at the movie. So this to me was a big cinema experience that tied in with all this giant screen, IMAX, show scan, Cinerama type things I had been trying to get to. So the Back to the Future ride was just a hugely satisfying thing for me.
We had to build these motion control booms, that was one of the little cameras there, this is one of the big terrain miniatures where we dive into an ice crevasse. The stuff was just really beautiful, we had a fantastic crew and it was an amazing experience uh... building this ride it's three minutes and fifty eight seconds of high speed high-intensity action and uh... i think i'll be able to show you that but here's the dinosaur this is a sixty four channel robot we'd had no computer graphics at this time and we barely had a little bit of optical printing so it all had to be in camera very very tricky so we had one boom here the supporting the camera 64 channels of Mocon running this dinosaur at one frame every two seconds or so. And then the DeLorean car, which is right there, is on nine tiny wires going up to another boom that's over here.
And there's all motion control here that's tipping and turning and moving the DeLorean car. And the wires are so microscopically thin that they don't get photographed. So we had actually two motion control systems working simultaneously and interacting with a 64 channel robotic monster it was really difficult complicated and amazing amount of fun to make and very satisfying to get completed. solved the actual set up of the lander build. Like I said, it's not going to be the same if one of the astronauts is walking around.
Here we have the Apollo 14 and it's landing on it's model. It's not going pretty far. You can fix the curved models after you get to the curvature of the moon. This is one way I could research the model.
I just looked at it for the RFE of the other graders and things like that. Here's something interesting about it. You can see some striations here. I put some lines on it to show you.
They're meaningful, and they look just like the mosaics that we can satellite flying over, counting around, capturing images, and they put the images together. And here you can see those striations. It's hard to avoid, but that's human reference. You can just build up a model, but here's where you're cleaning that up. and there is a contrast between the one on the left and the one on the right.
That's what they are. They are reasonably extravagant. And if you're coming from a land that has also turned up, you're going to have to pay for private goods in real time. And you see the sand now.
In 2014, the sand did not tolerate the use of chlorine, so we didn't have an opportunity to do an easy blend. The kingdom is the crater shadows. It's just the shape of the crater shadows. The more objects you think about it, trying to look at the windows, and seeing the red sand, the last thing you can almost always see are the craters.
That thing is spread by the objects. Those are deep shadows, very dark. The craters are just a room by a house. There it is, just got the blue shadow.
That makes it so blurry. The craters are really low in the crater. The other shadows are higher in the crater. Only the top of me don't see it because they changed it.
As I go back and forth, you can see all these records. They're all separate ships. It's not very difficult. They're on a scale, all even smaller.
One life size. That's quite a feat. This is why we look at all the other footage, lyrics, the view. They may claim this is a gas explosion, but it's not.
It's all the same surface that's shifted a little bit. So here's the difference. I should wear the bottle. Actually, there's two differences.
One of them lasted too long. Because one was the bottle, and one was the set of eyes. There's a change occurring there. The detail.
I'm not exactly sure what that is. It's inside of the lens. But there's no reason for this thing to be changing. The shape is there.
The only people on the other people on the moon were the astronauts themselves. It was ever since. And as usual, there were astronauts there, and they were the only ones left. I suspect it was possibly, or probably, a fake footage, an operation, with a fake front, something like a suit.
You can say it was infiltrated, I believe, the entire space program. It is a front. Yes, we're here for humanity. Yes, we're working on space, but no, we're putting space out of our control of the planet.
It's age-old technique, owning the sky. Yes, we call the folks, we call the powers that are great, we call the saints listening, we call the CIA.
























